Taylor Cam Profiles

This is a listing of masters we acquired from Taylor cams. They were designed by the late Bill Taylor, using much of the same software and consultation we use today. We will add to this list as we get things sorted out. There are more.

What do intensity numbers mean? Harvey Crane created “intensity” as a means of comparing the ramp designs of camshafts. Lower number are usually preferable but can be harder on the valve train depending on the entire lobe design.

Hydraulic intensity is the difference between .004 duration and .050 uration.

Minor Intensity is the difference between. 010 duration and .050 duration

Major intensity is the difference between .020 duration and .050 duration.


© Copyright Camcraft Cams • 54 Atrium Trail, Arden, NC, 28704 •
Toll Free (800) 426-2261• (828) 681-5183 • Fax (828) 681-5185