Camcraft
Newsletter
June/July, 2000
Editor: Charles Reichard
WWW.CAMCRAFTCAMS.COM
Dear
Customers,
Summer in now firmly entrenched, kids are out of school and everybody
seems to be quite busy. Life is pretty good! Our service is much improved over
the first part of the year. Our thanks to those of you that tolerated less
than stellar service earlier in the year. We are getting better.
I must apologize for our lack of newsletters recently. May got mailed
out with statements but a hard drive crash lost a couple before they were
e-mailed to our web host. Time just got away from me on the last 2 so they are
combined here.
We are pleased to announce the addition of Shannon
Keene to our staff. She has an interesting job history as automobile mechanic,
parts store manager, and factory maintenance mechanic. She is a drag racer and
will be on my crew when the Monza finally gets going again. She is primarily
responsible for our racing cams and with help from Clarence and me, is
learning rapidly. She is going to be a valuable asset to us.
Our daughter Victoria is filling in just about
everywhere she may be needed, mostly in the shipping and inventory
departments, but also doing some grinding as well. She leaves for Elon College
the end of August.
Winners
Mike Looney driving Tom Flemming’s #47 Limited
Late Model picked up 3 wins and a
2nd at New River Speedway in Virginia on.
Greg Edwards, running a Charlie High Racing engine,
picked up another win in the #27 Late Model Stock at Langley Speedway in
Langley, VA.
Alan Holmes of Lincoln County Auto Parts has won 5
features in his #59 open wheel car at Winchester Speedway in Winchester, TN.
His engines also powered Jerry Ashley in the #7 Late Model
to a win at Winchester SW. Duane Cobb won in the #2 Open Wheel at
Moulton Speedway in Moulton, AL and also got a win in the #82 Late Model win
at Huntsville Speedway in Huntsville, AL. Bill Robertson relied on Alan to
power him to a win in his 01 late
model at North Alabama Speedway
Central Performance Center in Liverpool, NY powered
Greg Carner to a win in the #44C sportsman Modified at Fulton Speedway June 3rd
. Greg has a 3rd and 2 4th
place finishes as well.
Look for more in the
August newsletter.
$349.00 3+
sets
Roller Rockers
All are for 7/16 studs These are race quality.
Quantity limited to current inventory stock We use
them in our Monza with 0 failures in 3 years over 7200 rpm.
½ sets available @ 60% of full set price.
SB Chevy
1.7/1.5 ratio
1.65/1.5
$195.00
1.6/1.5
Other ratios available
1.55 any combination. ½
sets available @ 60% of full set price
BB Chevy
1.7/1.7
$205.00
1.72/1.6
1.6/1.6
$195.00
BB
Ford 429,460 also 351C,M, 400
1.73/1.6
1.73/1.73
$205.00
Oldsmobile
1.6/1.6
$195.00
1.72/1.6
Carb. Special Price
Limited
quantity. When they’re gone that’s the end.
650 CFM spreadbore
-stock
$200.00
looks like new
was $265.00
650
Double pumper modified - Alky
$395.00
was $460.00
Double Pumper has 4 corner idle
circuits, Downleg boosters modified fuel circuits, and polished Venturis.
We use
Smithcraft carbs on our cars with great results.
Don’t miss
out on these great special deals.
We thank you
all for your continued support!
Yours truly,
Charles, Harriett, Clarence, Chuck & Shannon