Camcraft Newsletter
April 1, 2005
Editor: Charles Reichard
Dear Customers,
We are 3 months into 2005 and we have had a pretty busy 1st quarter. We have picked up quite a few new customers. Most of it is hardcore racing business. Many tracks have had their first practice session and everyone seems happy with their performance level. Racing starts next week so we’ll see what happens then.
I will be spending time with my consultant this month designing some restricted lift profiles. We have been having a lot of calls for them lately and we want to have the best. I will be gone from April 7th to about noon April 11th. I will be able to return a limited number of calls during this time.
Harriett and I will be in North Carolina for a brief visit this month. We will be out of the shop on the 15th and the 18th.
For the first time, we have 3 grinder operators and should be able to offer faster service. Tommy Dobson recently came on board last month and is catching on quickly. Danny Ewing, who worked for us briefly in the fall, has returned. He brings general machining skills to us as well, so he can do the little machining jobs I could never seem to get around to.
1975 Chevy Monza powered by 385” small block Chevy. 618 hp on dyno. Built by L&M Engines, Hatboro, PA. Tube frame with current certification. 2180 lbs, Strange front struts, 3 link rear w/ double adjustable Konis. Runs 9.20s @ 146 in ¼ and 5.80s @ 117 in the 1/8th . 1.28 60 ft. Transmission Specialties Powerglide with new 5000 stall converter. Dana 60 rear with new 4.56 gears, new 14.5/32W Hoosiers, New rod ends on rear suspension, Deadenbear crossover delay box & throttle stop, electric shifter, EGT, Reaction timer, MSD ignition, Sharp new Cream, Orange, & Purple paint job with very little vinyl lettering. Has onboard water & oil heater. Car is very consistent. Few passes on slicks, converter and rear, About 35 passes on engine. Trans checked when converter was changed. Nothing needed, Buy it and go racing. (See pictures on web site opening page scrolling bar)
This car was originally built by Frank Aragona Sr and campaigned in NHRA Econo Altered as Light & Lively III
Only $15,000.00 Turnkey
Call
(800) 426-2261 days (410) 822-2215 evenings
Also available: 36 ft Wells Cargo 5th wheel trailer. 16 ft living quarters, 2.3KW generator, lights, Propane Fridge, Water not plumbed but water heater is hooked up, sink and tank in place. Bathroom, sofa bed & queen size bed. Cabinets, paneled. Not fancy but very serviceable. 4 new tires on mag wheels with fresh brakes. Some new 4X8 tan aluminum included $3200.00
Also available: 1996 Chevy extended cab 1 ton dually, HD tow package w/ 6.5L turbo diesel, new tires, Silverado package with turbo wing, full length running boards, 5 speed trans, recent clutch, ATS exhaust. 80,000 miles. $11,750.00
Remember the thing that sets us apart from the competition is the commitment to help you go faster. We don’t want to have to get new customers for each cam we produce. We depend on repeat business and referrals. We can’t make a silk purse out of a sow’s ear but we can help upgrade your racing program no matter what level you are.
We
appreciate your continued support!!
Yours truly,