Camcraft Newsletter
March 1, 2002
Editor: Charles Reichard
www.camcraftcams.com

Dear Customers,

          It always amazes me how people have forecast the coming winter as severe or very cold for the past few years, yet the winters seem to be milder each year. Seems it happened again this year.

            Racing season will soon be going full blast. All of our race engine builders are very busy while the other sectors of the aftermarket are still up and down. Several tracks in Virginia open April 1^st and others soon follow. Drag racing has started in Delaware. We hope to be there soon.

2.9L Ford Roller Rockers

They’re almost here. In about 4 weeks we will      

    have 2.9L Ford roller rockers in stock.

This has been a lengthy project and taken a lot of time and effort to bring to fruition. We plan to have 1.55 ratio, which is a big jump from 1.47. More than that will involve spring & retainer changes. Other ratios will be available on special order with a 4 to 6 week lead-time. Pictures will be on the web site soon.

Price will be $425.00 + shipping

Orders received by 3/22/02 will receive

$50.00 Discount

Camcraft continues to be the sole aftermarket supplier of performance cams for the 2.9L & 3.0L Ford engines. We also have cams for the 4.0L engine as well. Remember we stock 2.9L engine kits, rebuilt connecting rods, Valves, Valve Springs, Valve locks, Rocker Arms,  Rocker Arm Spacers, etc. We also have a dynamite performance head for the 2.9L engine.

Rebuild kits with increased compression are available!

We want to be your one stop 2.9L parts source

Our Monza is at The GM Giant Here in Easton, getting a new paint job. We had a color change. It will be cream and orange instead if cream & purple. It is sure to look great. This year I am determined to travel a lot more. We will visit most Virginia tracks and Piedmont Dragway in North Carolina as well as others.

We are still working on our restricted lift profiles. We are adding a 226 degree duration @ .050 to our .307 lift HMTseries. There will also be .260 and .274 lift profiles as well. .004 duration will be 269 degrees.

March specials

Wheeler H beam rods;       5.7 & 6 inch SBC 2.100 journal         W/ARP bolts                   $375.00

We just found these. One set of each is all that’s left.

AED  HO Carbs       650 & 750 cfm    Beat the April price increase Double pumper                 $389.00

Be prepared for the new season with a state of the art Camcraft cam.

If you aren’t running a Camcraft Cam you’re probably following one

We appreciate your support,

Charles, Harriett, Clarence, Chuck and Ronnie